ELECTRICALLY WELDED PIPE

Brand Owner (click to sort) Address Description
FLAREWELD JONES & LAUGHLIN STEEL CORPORATION Pittsburgh PA ELECTRICALLY WELDED PIPE;
INCH-MARKED REPUBLIC STEEL CORPORATION REPUBLIC BLDG. CLEVELAND OH ELECTRICALLY WELDED PIPE, CONDUIT AND TUBING COMPOSED OF IRON, STEEL, OR FERROUS ALLOYS;
INCH-MARKED REPUBLIC CONDUIT, INC. 1209 ORANGE ST. CORPORATION TRUST CENTER WILMINGTON DE 19801 ELECTRICALLY WELDED PIPE, CONDUIT AND TUBING COMPOSED OF IRON, STEEL OR FERROUS ALLOYS;
INCH-MARKED MAVERICK C & P, INC. 7301 LOGISTICS DRIVE LOUISVILLE KY 40258 ELECTRICALLY WELDED PIPE, CONDUIT AND TUBING COMPOSED OF IRON, STEEL OR FERROUS ALLOYS;
 

Where the owner name is not linked, that owner no longer owns the brand

   
Technical Examples
  1. A high-pressure fuel injection pipe, which has an outside diameter (?) of 6.35 mm, an inside diameter (?) of 4.35 to 2.95 mm, and a wall thickness (t)of about 1.0 to 1.7 mm, can serve as a high-pressure fuel injection pipe for in-cylinder injection type gasoline engines which have an injection pressure of 4 to 20 MPa, and can adequately endure the use of low-grade gasoline, sour gasoline, DME (dimethyl ether), alcohol, alcohol blended fuel, etc. is provided. The high-pressure fuel injection pipe is manufactured by joining an outer pipe which is an seam-welded pipe or a seamless pipe and an inner pipe which is an seam-welded pipe with a Ni or Ni base alloy film on its inner peripheral surface, closely adhering them together by means of elongation.